0

Your Cart is Empty

West Coast Best Coast

October 28, 2021 8 min read

West Coast Best Coast

Beer of the Month Program

November 2021  - West Coast Best Coast -  $56.99

Each month we release a new recipe for our Beer of the Month. They are always recipes that we have personally brewed ourselves, and have to pass a taste test amongst all of the staff here (tough job we know!). The recipes will be easy to make and we will gladly assist new home brewers in the production of these beers. They will all be 5.5 gallons in size. We find that after fermenting and racking a 5.5 gallon batch turns into a standard 5 gallon batch pretty quickly.

At the start of every month we will post the recipe in store, as well as on our websiteFacebook, and Instagram. We will also have a set price for the recipe that will include a discount of up to 25%!

West Coast Best Coast

West Coast IPA – 5.5 Gal - OG 1.065 – FG 1.010 – ABV 6.8% - IBU 60 – SRM 7

Purchase Online | Printable Instructions

IPAs these days tend to be juiced up hop fruit bombs. You can’t buy an IPA in the LCBO that does not have the words HAZY/JUICY/DANK on the back of the can. These beers are good! (Hell, we released a recipe called HAZE 3 months ago). BUT, we’ve been getting an itch to get back to the classic West Coast style of IPAs. West Coasts are more a traditional IPA – Featuring more malt presence, more bitterness, and a darker colour (Copper instead of light gold). Instead of juice, you get pine, or light citrus. Most IPAs used to be this style until about 3-4 years ago when the NEIPA craze started.

West Coast Best Coast is our return to the roots of IPAs. This one is big, chock full of both bitter hop and flavouring hop additions. It has a strong malt backbone that balances out the strong hoppy flavour. Clocking in at 6.5-6.8% ABV and with 60 IBUs – it’s a big beer. So put down that juice bomb and come back to the OG IPA Style. 

    Ingredients

     

     

    Grains

    Amount (lbs)

     

    Canadian 2 Row

    11

     

    Flaked Oats

    2.0

     

    Honey Malt

    0.5

     

    Crystal Light

    0.4

     

    Biscuit Malt

    0.5

     

    Hops

    Amount (oz)

    Boil Schedule (minutes)

    Chinook

    1

    30

    El Dorado

    1

    10

    Chinook

    1

    10

    El Dorado

    1

    FLAME OUT – Add at 180°F

    Chinook

    2

    FLAME OUT – Add at 180°F

    El Dorado

    2

    DRY Hop – 6 Days into Fermentation

    Chinook

    1

    DRY Hop – 6 Days into Fermentation

    Yeast

     

     

    Vermont Ale – Escarpment Labs

    1 Package

     

    Extras  – Sold Separately

     

     

    Gypsum

    ¾ tsp at mash in.

     

    Irish Moss

    1 tsp for last 15 minutes of boil

     

    DME/Dextrose

    150g (1/2 cup) at bottling for priming

     

     

    Important Tips on Brewing

    • Be extra cautious when it comes to cleaning! Once you have stopped boiling your wort everything that gets in contact with the beer MUST be sanitary.
    • The temperature of your mash is ABSOLUTELY CRITICAL. Not being in the 150-155f range can drastically affect your beer. Make sure you correct the temperature ASAP once all of the grain has been added to the mash.
    • Always let your beer ferment for 10 days! Do not disturb it, do not open the lid. It is absolutely natural for the airlock to stop bubbling after a few days, it is still fermenting though.
    • Oxidization: Airspace is always something to consider. When undergoing primary fermentation airspace is needed so that the beer can bubble up and ferment vigoursley without leaking out of the container. The fermentation creates a layer of CO2 that remains in the pail due to the airlock. Once primary fermentation is over, and the lid has been opened, the layer of CO2 dissipates, and oxygen replaces it. At this point airspace can ruin your beer. When racking into carboys make sure they are filled to the top, or you blast CO2 inside to prevent oxidization. Ask us for details on this!
    • Before bottling, make sure you use a priming calculator (many can be found online) to verify the amount of sugar that needs to be added.

    Instructions

    Mashing -> converting the grain into a fermentable liquid.

    • Bring 6 gallons of water in your brew pot to 155°F. This is our strike temperature. Turn off the heat to the pot.
    • If you are using standard Guelph tap water, add ¾ tsp of GYPSUM to the water. This raised the sulfates in the water which brings out more hop aroma, and crisper hop bitterness.
    • Wrap the muslin/nylon bag around the brew pot and slowly pour all the milled grains into the bag. Stir them in while adding to prevent clumps. The addition of grain should drop the temperature down to 150-155°F.
    • We want to mash the grain at 154°F for 60 minutes. It is very important to hold the temperature at 154°F. If the temperature rises above 155°F it hurts the fermentation, or if it dips below 149°F it can lead to a thinner tasting beer.
      1. The first 15-30 minutes are essential for the success of your brew. The temperature HAS TO BE IN THE RANGE OF 150-155°F. Sometimes adding the grain to the strike water does not lower the temperature enough, in this case add a little bit of cold water to bring the temperature down. Cover the pot with your lid and let it sit.
      2. Most brew pots will be able to maintain 154°F without adding heat for 20 minutes, we recommend checking the temperature every 15 minutes, and if it drops add more heat to bring it up. We recommend opening the lid and using a thermometer in the liquid.
    • After 60 minutes, bring the temperature of the mashing grain up to 170°F and hold for 10 minutes. This is our mash out.
    • Time to remove the grain. Lift the bag full of grain out of the brew pot. Let the liquid in the bag dribble into your wort. Once that is done, put the bag inside of a brewing pail, or another empty pot. There will be about 4 gallons of wort in the brew pot, we need to get it to 6 gallons before we can begin the next stage.
    • Run warm water through the grains in the bag, aim for 170°f – let it run through the grains and add to the brew pot. Add until you reach 6 gallons.
      1. PSA: It is natural to think that the grains need to be squeezed to get all of the liquid out of them, DO NOT DO THIS. Aggressively squeezing the grains will lead to tannin extraction and a doughy taste in your beer. Lightly pressing the bag is fine, but do not try to squeeze every last drop out.

    Boiling -> Sterilizing the wort time.

    • Bring 6 gallons of your wort to a rolling boil, and let it boil for 5 minutes, this is called the hot break. Start a 60-minute timer. Keep the wort boiling (212°f) and uncovered.
    • With 30 minutes left in the timer, add 1 ounce of Chinook to the boiling wort.
    • With 15 minutes left in the timer add 1 tsp of Irish moss to the boil. If you have a wort chiller, we recommend adding it at the 15-minute mark.
    • With 10 minutes left in the timer, add 1 ounce of Chinook and El Dorado to the boiling wort.
    • When your timer goes off, turn off the heat, and now it’s time to add MORE hops!

    Cooling & Whirlpooling -> Let’s Get Hoppy

    • We need to cool the beer a bit before adding more hops. Our target temperature is 180°F. This will not take too long to cool if you’re using a wort chiller. Adding hops at 180°F will maximize the flavour of the hops but add just a little bitterness.
    • Once the wort is down to 180°F, add 1 ounce of El dorado, and 2 ounces of Chinook. Let the beer sit for 10 minutes. Do NOT actively cool the beer.
    • After the 10 minutes are complete. Start cooling the beer down to 25°C, this is our yeast pitching temperature.

    Fermentation -> Turning the wort into beer

    • After the boil is done it is time to be extra careful in regard to sanitation. We recommend using a no-rinse sanitizer called Starsan. Mix ¼ tsp of it with water in a 500ml spray bottle. Before we touch any part of the beer, we spray it with Starsan.
    • Transfer the cooled wort into your fermenting pail or carboy. Run it though a strainer to catch any hop or grain residue. With all of the hop matter in this beer, it might take a while to strain through all the hops.
      1. It is also good time to take a hydrometer reading. It should be around 1.065 give or take a few points.
    • Be sure to use a pail for fermentation. It will be hard to rack a carboy with all of the dry hops that are added.
    • Make sure the wort has been cooled to at least 25c!!! Adding yeast at a higher temperature will likely kill it.
    • Once the beer is in the fermenter, shake up and pour in the package of Vermont Ale yeast AND 1 gram of Yeast Lightning. The yeast lightning will assist the fermentation.
    • Put the bung and airlock in the hole (make sure there is water filled up to the line in the airlock). If using a pail, make sure the lid is sealed tight. Put the pail in a room that is in the range of 19-23°c.
    • After 6 to 7 days have passed, it is time to add the dry hops. Quickly open the lid or remove the bung and pour in 1 ounce of Chinook and 2 ounces of El Dorado.
      1. Potential oxidization is a concern here. If you have CO2 available, we recommend spraying a layer of it in the fermenter after adding the hops.
      2. If you don’t have CO2, then we recommend making a small tincture of dextrose and water. Boil 100ml in the kettle and mix with 100g of dextrose. Stir and dissolve, and then pour into the fermenter. This will create a mini fermentation which will result in the production of CO2 which keeps the oxygen at bay. Have the tincture ready before you add the hops. The less time the lid/bung is open the better!
    • Let the beer sit for 3 more days after adding the dry hops.
    • After 10 days have passed, take a hydrometer reading. It should be somewhere between 1.009-1.014.
    • Lately, we have been of the opinion that secondary is an unnecessary step. Unless you are kegging, we recommend proceeding to the bottling stage. Clarification can occur in the bottle rather than in a carboy, and the risk of oxidization is greatly reduced.

    Bottling -> We’re getting close to Beer Time now.

    • Rack the now fermented beer into a bucket.
    • At the same time, mix the priming sugar with 300ml of boiling water and add to the beer. Stir it in VERY gently.
      1. Make sure to check out a priming calculator to verify the correct amount of sugar. Too much sugar and your beer will end up foamy, or even start blowing the caps off! Too little and the beer won’t be fully carbonated.
    • Rack the beer into your bottles or growlers. Then, let them sit for 2-3 weeks at room temperature. Chill and enjoy!